CATEGORIES
- CHEMSHINE MACHINERY
- CHEMSHINE CARBON
- Carbon/Carbon Composites
- Rayon Based Soft Graphite Felt/ Carbon Felt
- PAN Based Soft Graphite Felt/Carbon Felt
- PAN Based Rigid Graphite felt Board/Cylinder
- Rayon Based Rigid Graphite Felt Board/Cylinder
- Carbon Fiber Fabric/Cloth
- Graphite Products
- Graphite Foil/Sheet/Roll
- Activated Carbon
- Carbon Fiber Rope
CONTACT US
B403,JIAHE ROAD 396,XIAMEN,CHINA
0086 592 5530176
0086 592 5531751
Products
-
TMC-120 tunnel mucking machine for tunnelling and mining
Product advantages As a kind of tunneling mucking machine/equipment, TMC-120 crawler tunnel loading machine puts rock into the transportation machine by crawler pushing. The scraper transportation machine transfers the rock into unload-self bus or shuttle tramcar from rear. Meantime, it snatches at the far rock by the reverse excavation arm and clears working face by the bucket. Adopts entirely the hydraulic drive by electric control, the configuration is compact, propulsion power is big and the extension of snatching is wide. It can load rocks in a complete cross-section and not remain dead angle, which doesn’t need to clear the working face by man assistant. This model is designed for working in big slope lanes
-
BQ Boart Longyear Specification wire line drilling rod
BQ Boart Longyear Specification Geological Wire Line Drill rods and the AQ,BQ,NQ,HQ drill rods.
-
America Standard BQ drill rod Chemshine BQ drill rod are made of super tubes according to Boart Longyear standard, must be heat treated many times to guarantee high quality and excellent connection. Our old clients comment that our drill rods are good to use and very durable. Technical Data
-
R32N self drilling anchor bolts
Self drilling anchor bolts Chemshine self-drilling anchor/ rock anchors embodies drilling, grouting and anchoring as a whole. Widely used as an efficient anchoring means, in tunnel pre-support, slope, coast, mine, water conservancy projects, building foundation, roadbed reinforcement and geological diseases treatment such as landslip, crack, sink age. It’s irreplaceable in narrow construction environment.
-
Boart Longyear standard specification NW casing
Boart Longyear standard specification NW casing Casing: W Thread This casing is intended for single use or situations where the casing is left in the hole. The W casing is made from DCDMA C80 tubing and utilize the DCDMA W thread form. The W thread is a straight thread (4 threads per inch). This casing is universal in design and can be used in any drilling application where threaded casing is required to be left in the ground.