Home>>Case

CONTACT US

Case

  • Graphite Electordes2016-03-14 10:58:48

    Graphite electrodes are used mainly in electric arc furnace steel production. They are presently the only products available that have the high levels of electrical conductivity and the capability of ...

  • Vacuum furnace series products2016-02-18 14:37:39

    graphite stents, heat resisting graphite bolt, graphite plate, vacuum heat treatment furnace, graphite heating bar, sintering graphite plate, sintering graphite boat, graphite heating components and p...

  • Graphite Plate2016-01-25 10:35:46

    Graphite plates are attached to the electrode backings of a fuel cell stack on either side. These plates serve a double purpose within the fuel cell stack. One purpose of the graphite plate is to act ...

  • Carbon Carbon Composite2016-01-14 14:58:23

    Carbon/ Carbon ( C/ C) is a lightweight, high-strength composite material capable of withstanding temperatures over 3000 ° C in many environments. Our Carbon/ Carbon Composites use the strength and mo...

  • Difference between PAN & Rayon felts2016-01-07 11:46:05

    1) PAN (PolyAcrylNitrile) is lower cost.   2) PAN has courser fiber, larger fiber diameter, so lower surface area.   3) PAN is stiffer & fiber dust is itchier.  Rayon is more f...

  • Vacuum Deposition2015-11-13 10:22:50

    Vacuum deposition is a family of processes used to deposit layers of material atom-by-atom or molecule-by-molecule on a solid surface. These processes operate at pressures well below atmosph...

  • Annealing2015-11-05 14:59:20

    Annealing is a rather generalized term. Annealing consists of heating a metal to a specific temperature and then cooling at a rate that will produce a refined microstructure. The rate of cooling is ge...

  • Refractories2015-11-03 14:31:36

    This end-use began before 1900 with the graphite crucible used to hold molten metal; this is now a minor part of refractories. In the mid-1980s, the carbon-magnesite brick became i...

  • Carburizing2015-10-27 14:26:37

    Carburizing, carburising (chiefly British English), or carburizationis a heat treatment process in which iron or steel absorbs carbon liberated w...

  • Quench Hardening2015-10-22 12:10:49

    Quench C hardening is a mechanical process in which steel and cast iron alloys are strengthened and hardened. These metals consist of ferrous metals and alloys. This is done by heating the material to...