Carbon-fibre-reinforced polymers2015-08-11 09:53:39

Rudder of Airbus A310 Advantages over a traditional rudder made from sheet aluminium are: 25% reduction in weight 95% reduction in components by combining parts and forms into simpler moulded parts. O...

Vehicle body made from cotton, hemp, and wood2015-08-06 10:51:38

Carbon and glass fibers reinforce synthetics so that they can be used for vehicle body construction. But in this regard, there is an abundance of potential found in natural fibers -- obtained from hem...

Unique material created for the next generation solar cells2015-08-04 14:50:18

"The material created by us is considerably cheaper and the process of its synthesis is less complicated than that of the currently used analogue material. Also, both materials have very similar effic...

Automotive2015-07-30 13:58:24

Internal combustion engines produce a lot of heat during their combustion cycle. This can have a negative effect when it reaches various heat-sensitive components such as sensors, batteries and s...

Activated Carbon Fiber Cloth Application2015-07-23 14:47:46

Activated carbon fiber cloth  APPLICATION Filters for organic substances (chemical solutions and run-off water), especially when substance concentration level is low; Regeneration of organic solv...

Buliding2015-07-15 13:58:06

Maintaining acceptable temperatures in buildings (by heating and cooling) uses a large proportion of global energy consumption. Building insulations also commonly use the principle of small trapped ai...

Sintering Diamond2015-07-10 09:33:31

Sintered metal-bonded diamond blades are the most common type of blade. These blades consist of a steel core (the base is steel plate, unlike that of the wires used in diamond wire saws...

Vacuum Brazed Diamond Saws2015-07-08 11:04:14

Vacuum brazed diamond saws are manufactured by welding synthetic diamond particles to the outside edge of the circular saw blade in a vacuum brazing furnace. All of the diamond particle...

Solar cell2015-07-01 16:23:26

In general, a solar cell that includes both solar and nonsolar sources of light (such as photons from incandescent bulbs) is termed a photovoltaic cell. Fundamentally, the device needs to fulfill only...

Carbon Felt Used in Inert Gas Furnaces2015-06-09 12:06:39

Carbon felt and graphite felt are designed  for use  as  high  temperature insulation in vacuum furnaces and inert gas furnaces. The needle-punched PAN based carbon ...