Durable hydraulic anchoring drilling rig MGY120 on crawler

Durable MGY120 hydraulic anchor drilling rig 1,Drill Dia.(mm)             Φ110-Φ220 2,Drill Depth(m)               120-60 3,Model of power Electric                      Y225M-4      45Kw/1480r/min Diesel engine                 4105         45Kw/1500r/min 4,Hydraulic system pressure(Mpa)      20 5,Front power head  Output speed(r/min)   0-30     Output torque(Nm)   8000 6,Back power head   Input speed(r/min)   0-40/0-160  Input torque(Nm)  3500/900 7,Lifting/Pushing speed(m/s)      0-0.16/0-0.21 8,Drill anger(°)    0-90 9,Max pull/Max feeding capacity(N)    100000/70000 10,Feeding stroke(mm)      1700 11,Weight(kg)   6000

anchoring and jet-grouting drilling for sale MYG120

Anchoring and jet-grouting drilling for sale MYG120 Mainly used in drilling soil and rock anchoring hole for prevention and treatment of geology disaster   screen injection for tunnel, also suitable for supporting in deep foundation pit of hydroelectric powerstation, communication, energy capital construction, mini-grouting pile hole, hydrography well and high pressure jet-grouting.

Super advanced DMY120 impact anchoring drill

Super advanced DMY120 impact anchoring drill DMY120 is a  anchor drilling rig with impact function,full hydraulic drive,with hydraulic impact rotary head,It can continuously impact when the drill rod rotate,it is a very reliable construction method for drilling complicated formation ,it has the following application: 1,Engineering anchoring,pipe roof support,cable bolting,highway. 2,Drilling soil and rock anchoring hole for prevention and treatment of geology disaster screen injection for tunnel. 3, Used for supporting in deep foundation pit of hydroelectric power station, communication, energy capital construction, mini-grouting pile hole, hydrography well and high pressure jet-grouting.

10MM Carbon Carbon Composite Board for Vacuum Sintering Furnace

Boart Longyear standard specification PW coring casing 3m

Boart Longyear standard specification PW coring casing Casing: W Thread   This casing is intended for single use or situations where the casing is left in the hole. The W casing is made from DCDMA C80 tubing and utilize the DCDMA W thread form. The W thread is a straight thread (4 threads per inch). This casing is universal in design and can be used in any drilling application where threaded casing is required to be left in the ground.

PAN Based Rigid Graphite Felt Square Shape Cylinder For Sintering Furnace

Rayon Based Rigid Graphite Felt Hexahedron Shape Cylinder For Furnace

PAN Based Rigid Reinforced Graphite Felt Ring Shape Gasket

core barrel tube drill barrel core barrel for concrete cutting

Core barrel tube drill barrel for concrete cutting ,Wet Diamond Core Drill Bits  

Beautiful core bit for concrete coring and concrete cutting

core bit for concrete coring Diamond Drill Bit in 1-1/4"UNC Connection and 450mm Working Length     For wet cutting very wide range of building materials, such as reinforced concrete, brick/block and general building materials.   Our Concrete Core Bits can be very Fast cutting with very long working life.    Our  Concrete Core Bits are used high precision steel core tube.   Our Concrete Core Bits are widely used for professional works.  

Concrete coring bit 350mm diameter

Concrete coring bit Concrete core Bits in 1-1/4"UNC Connection and 450mm Working Length   For wet cutting very wide range of building materials, such as reinforced concrete, brick/block and general building materials.   Our Concrete Core Bits can be very Fast cutting with very long working life.    Our  Concrete Core Bits are used high precision steel core tube.   Our Concrete Core Bits are widely used for professional works. 

PAN Based Rigid Graphite Felt Panel