CATEGORIES
- CHEMSHINE MACHINERY
- CHEMSHINE CARBON
- Carbon/Carbon Composites
- Rayon Based Soft Graphite Felt/ Carbon Felt
- PAN Based Soft Graphite Felt/Carbon Felt
- PAN Based Rigid Graphite felt Board/Cylinder
- Rayon Based Rigid Graphite Felt Board/Cylinder
- Carbon Fiber Fabric/Cloth
- Graphite Products
- Graphite Foil/Sheet/Roll
- Activated Carbon
- Carbon Fiber Rope
CONTACT US
B403,JIAHE ROAD 396,XIAMEN,CHINA
0086 592 5530176
0086 592 5531751
Products
-
PAN Based Flexible 5MM Carbon Felt for Vanadium Redox Battery
-
10MM Carbon Carbon Composite Board for Vacuum Sintering Furnace
-
R38N self drilling anchor bolts
Self drilling anchor bolts R38N Chemshine self-drilling anchor/ rock anchors embodies drilling, grouting and anchoring as a whole. Widely used as an efficient anchoring means, in tunnel pre-support, slope, coast, mine, water conservancy projects, building foundation, roadbed reinforcement and geological diseases treatment such as landslip, crack, sink age. It’s irreplaceable in narrow construction environment.
-
R51N self drilling anchor bolts
Self drilling anchor bolts R51N Chemshine self-drilling anchor/ rock anchors embodies drilling, grouting and anchoring as a whole. Widely used as an efficient anchoring means, in tunnel pre-support, slope, coast, mine, water conservancy projects, building foundation, roadbed reinforcement and geological diseases treatment such as landslip, crack, sink age. It’s irreplaceable in narrow construction environment.
-
Thread Button Bits For Hard Rock Drilling , Available in R25/R32/R38/T38/T45/T51 Styles
Thread Button Bits For Hard Rock Drilling , Available in R25/R32/R38/T38/T45/T51 Styles
-
PQ rod with HWT thread Boart Longyear standard HWT casing PQ casing
Boart Longyear standard HWT casing PQ casing
-
Boart Longyear standard specification PW coring casing 3m
Boart Longyear standard specification PW coring casing Casing: W Thread This casing is intended for single use or situations where the casing is left in the hole. The W casing is made from DCDMA C80 tubing and utilize the DCDMA W thread form. The W thread is a straight thread (4 threads per inch). This casing is universal in design and can be used in any drilling application where threaded casing is required to be left in the ground.